3.2.3. Digitalizando geometría detallada

3.2.3.1. General

Puedes agregar geometría detallada a las estructuras de aguas residuales.

Esto es lo recomendado para:

• Special structures and discharge points, because they are not normed structures like manholes, where you can define dimension1 and dimension2 to describe the extension.

• Infiltration installations where dimension1 and dimension2 are not enough to describe the geometry

Atención

Detailed geometry is usually not used for manholes or channels!

3.2.3.2. Herramienta de digitalización

• Selecciona la capa vw_qgep_wastewater_structure

• Select the object where you want to add a detailed geometry with the info tool

• Clic derecho en el objeto

• if there are several objects: select the vw_qgep_wastewater_structure layer

• Elegir Digitalizar

• Ahora puedes empezar a digitalizar el polígono.

• Clic derecho para detener.

An other way is to open the vw_qgep_wastewater_structure form with the info tool and then choose Digitize in the Actions menu of the form.

Nota

If the geometry disappears after digitizing or if you get an message (like “Add part”), you have probably tried to digitize over a catchment area (or an other polygon theme) and the layer has set the avoid overlap option in the snapping settings. Do change the avoid overlap settings.